A) Dialup to WingNET

B) ping by name
    1. Go to "Start" then "Run"
    2. Type "cmd" and click "OK"
    3. At the command prompt, type 'ping wingnet.net' and hit
    enter.
    4. If you get the following results, then your problem is in your
    browser:

       Reply from 206.30.215.2: bytes=32 time=3ms TTL=63
       Reply from 206.30.215.2: bytes=32 time=3ms TTL=63
       Reply from 206.30.215.2: bytes=32 time=3ms TTL=63
       Reply from 206.30.215.2: bytes=32 time=3ms TTL=
        ---Go to step D---
    5. If it does not work, continue to step C.

C) If it doesn't work, go back to step B and enter 'ping 206.30.215.2' 
instead. If you receive the above results, please contact tech 
support. If you do not receive the above results, continue to step D.

D) telnet wingnet:
    1. Go to "Start" then "Run"
    2. Type "cmd" and click "OK"
    3. At the command prompt, type 'telnet wingnet.net 80' and hit
    enter. see if it opens a connection.
    2. if it does, type "GET /" and see if the wingnet page comes up
    3. If it doesn't, there's something blocking port 80 traffic.
    (Contact tech support)
    4. If it does, it's a browser problem.  Try another (separate) 
    browser.